Megapower® 25AT5/390 ( AT5-390-25 )

• Pitch: AT5
• Width: 25 mm
• Pitch Length: 390 mm

MEGAPOWER timing belts are manufactured by a unique thermoset molding process.

The high-grade polyurethane gives excellent abrasion and tooth shear resistance, combined with a variety of high-grade steel cords, ensuring high-tensile strength. The result is a timing belt with excellent dimensional stability. Megapower molded timing belts are manufactured to a tight tolerance range, which assures consistent length, width and thickness.

The combination of these factors result in Megapower performing to the highest physical and chemical levels.

MEGAPOWER PU belts are suitable for high-power, precision motion and control even in high-speed applications.

• Consistent dimensional stability
• Low pre-tension
• Low noise
• High abrasion resistance
• Low maintenance
• High flexibility
• Linear speeds up to 80 m/second (over 15,000 ft./min.)

• Good resistance to aging, hydrolisis, UVA rays & ozone
• Working temperature: -13�F to + 176�F (up to +230�F for short periods)
• High resistance to oils, fats and greases
• Good resistance to most acids and Alkalis

MEGAPOWER PU belts perform especially well on light synchronized and stepped drives, in office automation and domestic appliance applications.